Hangzhou Mige Electric Co., Ltd.
Main products:servo motor,step motor
Products
Contact Us
  • Contact Person : Ms. Zhan Lisa
  • Company Name : Hangzhou Mige Electric Co., Ltd.
  • Tel : 86-571-57576990
  • Fax : 86-571-82308685
  • Address : Zhejiang,hangzhou,wenyan town xiaoshan district
  • Country/Region : China
  • Zip : 311200

17HM3630 Nema 17 mini dc stepper motor with driver

17HM3630 Nema 17 mini dc stepper motor with driver
Product Detailed
17HM3630 Nema 17 mini dc stepper motor with driver 1) shaft diameter: 5.0mm 2) step angle: 0.9 3) current: 0.4 A 4) CE, ISO

17HM3630 Nema 17 mini dc stepper motor with driver is a brushless, synchronous electris motor that can divide a full rotation into a large number of steps. The motor's position can be controlled precisely, without any feedback mechanism.

17HM3630 Nema 17 mini dc stepper motor with driver Parameters:

Model

17 HM3630

Step Angle(degree)

0.9

Length L(mm)

34

Holding torque(N.m)

0.2

Current (A/phase)

0.4

Resistance(Ω)

30

Inductance (mH)

22

Rotor inertia (g.cm2)

34

Weight (kg)

0.22

Step accuracy

5%

Temperature

80 degree Max

Environmental temperature

-20 ~  +50 degree

Insulation resistance

 100MΩ   Min 500 V DC

Withstand voltage

500V AC 1minute

Shaft Radial Play

0.02mm Max.(450g-load)

Shaft Axial Play

0.08mm Max.(450g-load)

Shaft diameter(mm)

6.35mm

Shaft length(mm)

24 mm

Features

1, Low noise and runs smoothly

2, High performance, low price

 3, Provides 12/8 kinds of micro step selection,upmost micro step can be set to 200 x,enhance resolution

 4, Special control circuit, greatly reduce noise, increase steadiness

 5, Upmost response frequence amounts to 200Kpps

6, Once the pulse stops for 100ms,the phase current will automatically cut by half

 7, Bipolar constant current chopper control

 8, Photocoupler isolated input/output

 9, Drive current range from 0.1A/phase~4.0A/phase

10, can match two phase hybrid step motors whose rated current under 4.0A  11, Single power input, voltage range from DC12-40V

 12, Protection circuit, Overheat protection, Over current, under voltage protection

 13,Small in size ,compact driver, its dimension is only 25x136x92mm3.

14, Typical application Carve machine,laser labeling machine,laser internal carve machine.

 

Please contact with us for more detailed technical information.

We can design according to clients' requirements.

17HM3630 Nema 17 mini dc stepper motor with driver



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.